CONSILEX IDROFIX

Water-based consolidating product for stone, brick and concrete

Code: CSX.0334

Components: 1

Appearance: Liquid

Liquid product based on lithium silicates, which was created for the protective, consolidating and porosity reducer treatment of concrete, mineral, brick and stone substrates. It guarantees optimal durability and adhesion strength, resistance to UV rays, chemical agents and mechanical stresses. The result of the application allows to obtain a rapid hardening of the surface as well as a revived and homogeneous appearance of the same. The product has a negligible environmental impact thanks to the low VOC content (<50 g / l) and is practically odorless.

Linee di appartenenza

General characteristics

density

Density: 1.19-1.21 kg/l

nonflammable

Nonflammable

solvent-free

Solvent-free

temperature-of-use

Temperature of use: +5 / +40 °C

Technical specifications

Chloride content

< 0.05 %

Depth of penetration

2-8 mm

Minimum penetration time

30 min

pH

11-12 _

Solids

25-26 %

The product doesn't create film

VOC content

< 50 g/l

Walkable after

24 h

Available colours

- Transparent

Packaging and dimensions

- Plastic can 5 kg

- Plastic can 10 kg

Consumption

From 0,20 to 1,00 kg of CONSILEX IDROFIX per square meter of surface to be treated, based on the porosity of the support.

Use fields

Protective, reinforcing, water repellent treatments of concrete, mineral and stone supports. Specific product for revitalizing, simultaneously providing a great consolidation and an annulment of the dust produced in concrete supports, interstices, brick, stone or mixed arches, present in taverns, public premises and of historic monuments interest.

Preparation of supports

The application surfaces should be clean, free of incrustations, dust etc. A preliminary wash with distilled water or steam it's recommended.

Use method

The support should be dry when applying. Apply the product as it is, with low pressure sprayer or brush with long bristles. Keep the substrate wet with CONSILEX IDROFIX for at least 20 minutes during application. If applied on floors, wait 24 hours before passing on the treated support. The reinforcing contribution will be completed after 2-3 weeks of treatment.

Application methods

- Low pressure airless nebulizer

- Brush

Tool cleaning

- Water

Permitted supports

- Plasters

- Cement-based or lime-based mortars

- Tuff

- Mixed walls (bricks and stones)

- Stone walls

- Porphyry and natural stones

- Bricks

Contact us now

Vuoi saperne di più sui nostri prodotti?

Attention, correctly compile this field.
Attention, enter a valid email address.
Attention, correctly compile this field.

By submitting I accept the privacy policy

Attention, correctly compile this field.

Subscribe to the newsletter

Share

Products on display

  • Protech Balcony
  • Grout Power
  • Readymesh