CONSILEX IDROCON

Reinforcing repellent for masonry surfaces

Code: CSX.0022

Components: 1

Appearance: Liquid

Special balanced solution of fumed silica esters, silanes, siloxanes, in solvent, characterised by high penetrating ability in silicic media and by the effective dual reinforcing and water repellence action, for protective, reinforcing and hydrophobising treatment of mineral and stone media. It does not result in colour variations or alterations of breathability.

Linee di appartenenza

General characteristics

shelf-life

Shelf-life: 12 months

temperature-of-use

Temperature of use: +10 / +30 °C

Available colours

- Transparent

Packaging and dimensions

- Plastic can 10 l

- Pallet: 75 x (Plastic can 10 l)

- Plastic can 25 l

- Plastic can 5 l

Characteristics

CONSILEX IDROCON exerts a dual action of reinforcement and water repellence due to the peculiar reaction with atmospheric moisture and the silica present in the media. Products treated with CONSILEX IDROCON will benefit from improvements obtained in respect of the prevention of saline efflorescence, of mildew, algae, lichens, etc., of the drastic reduction in chalking, the reinforcement of the mineral masonry fabric and of the adhesive improvement of paints and coatings present, in general.

Consumption

From 0.20 to 1.00 litres of CONSILEX IDROCON for each square metre of surface to be treated, based on the porosity of the support.

Use fields

Protective, reinforcing, water repellent treatments of mineral and stone supports. Specific product for revitalizing, simultaneously providing a great consolidation and an annulment of the dust produced in the interstices, brick, stone or mixed arches, present in taverns, public premises and of historic monuments interest.

Preparation of supports

The application surfaces should be clean, free of incrustations, dust etc. A preliminary wash with distilled water or steam It is recommended.

Use method

The support should be dry when applying. Apply the product as it is, with low pressure sprayer or brush with long bristles. The reinforcing contribution will be completed after 2-3 weeks of treatment.
It is appropriate to apply the product on cold surfaces, protected from direct sunlight, in the thermal range +10 / +30°C.

Application methods

- Brush

- Sprayer

Tool cleaning

- Nitro thinner

Permitted supports

- Plasters

- Concrete

- Cement-based or lime-based mortars

- Drywall

- Plaster (gypsum)

- Fiber-cement

- Bricks

- Tuff

- Mixed walls (bricks and stones)

- Brickworks

- Stone walls

Contact us now

Vuoi saperne di più sui nostri prodotti?

Attention, correctly compile this field.
Attention, enter a valid email address.
Attention, correctly compile this field.

By submitting I accept the privacy policy

Attention, correctly compile this field.

Subscribe to the newsletter

Share

Products on display

  • Pro Seal
  • Floortech Prerit
  • Readymesh