CONSILEX EM DROP

Transparent water repellent solution for porous materials, with drop effect

Code: CSX.0359

Components: 1

Appearance: Liquid

CONSILEX EM DROP is a VOC-free aqueous silane emulsion used to make absorbent building materials water-repellent and confer a high pearl effect. A water-repellent, colourless, non-filming impregnator to protect plasters, cement systems, and so on, without altering the treated surfaces.

Linee di appartenenza

General characteristics

density

Density: 0.95 kg/l

nonflammable

Nonflammable

shelf-life

Shelf-life: 12 months

solvent-free

Solvent-free

temperature-of-use

Temperature of use: +5 / +35 °C

use-wearing-protective-glasses

Use wearing protective glasses

use-wearing-protective-gloves

Use wearing protective gloves

uv-resistant

UV-resistant

Available colours

- White

Packaging and dimensions

- Plastic can 5 l

- Plastic can 25 l

Consumption

Dilute the CONSILEX EM DROP in a ratio 1:10 at most 1:20. In case of long storage, prepared solutions must be additivated with an preservative agent in order to protect them from bacterial proliferation. Apply the ready-to-use solution by spray (airless nebulizer), brush or paint roller. Dosage depends on how absorbent the material is, one single coat or two coats wet-on-wet are generally enough.

Use fields

Impregnation, waterproofing, protective treatment of floors and coatings, brick, cement or lime-based conglomerates generally, etcetera.

Preparation of supports

Recommended for treating vertical or very inclined surfaces cleaned of soluble salts and dirt, also taking care to remove parts with poor surface adhesion by brushing and hydro-sandblasting. Effectiveness in micro-cracks up to 0.3 mm. Apply to dry surfaces. In the event of rain or surface washing, wait 3 days at a temperature of at least 20° C prior to treatment.

Use method

Apply the product evenly, by spraying at low pressure or brushing on one or more coats, preferably without interruption or time intervals between one coat and the next, taking care to achieve the best saturation of the wall covering.

Application methods

- Low pressure airless nebulizer

- Brush

- Paint roller

Tool cleaning

- Water

Permitted supports

- Plasters

- Concrete

- Cement-based or lime-based mortars

- Bricks

Contact us now

Vuoi saperne di più sui nostri prodotti?

Attention, correctly compile this field.
Attention, enter a valid email address.
Attention, correctly compile this field.

By submitting I accept the privacy policy

Attention, correctly compile this field.

Subscribe to the newsletter

Share

Products on display

  • Floortech Prerit
  • Pro Seal
  • Sanageb