Caleosana zoom
Caleosana image 1
Caleosana image 2
Caleosana image 3

Caleosana

Insulating, macroporous, dehumidifying, anti-condensation plaster

A plaster for interiors and exteriors that is macroporous, in respect of green building standards, with high thermal insulation and anti-condensation performance, having a base of natural hydraulic lime NHL 3.5, siliceous aggregates, metakaolin, granular expanded silica with an extremely high volume of interconnecting voids and a low elastic modulus. Its particular characteristics make it suitable for dehumidification, for heat and humidity treatments on buildings and walls, in ecological building operations and in the restoration of historical buildings and monuments.
Components
Single-component
Appearance
Powder
Customs code
3824 5090

Request product info

    By submitting I agree to the privacy notice

    Obtained Certifications and Regulations
    EN 998-1
    Lines of belonging
    Linea prodotto Building
    Linea prodotto Opus
    Linea prodotto Sanageb
    Thematic site
    Opus Dry
    Features and benefits
    Where it is used
    How to use
    Technical data
    Additional content
    Warnings and precautions
    Media
    Related products

    Caleosana

    Caleosana does not contains traces of resins, solvents or radioemissive aggregates.
    Fields of application
    Vintage and new construction masonries subject to rising damp, condensation, mildew. Recommended mainly for thermo-insulating anti-condensation rehabilitation of internal perimetral masonry and underground areas in general.
    Allowed supports
    Concrete
    Bricks
    Tuff
    Mixed walls (bricks and stones)
    Brickworks
    Stone walls
    Preparation of supports
    Removal of degraded plaster up to the ceiling. Cleaning the resulting supports, including the removal of salt deposits; thorough dedusting and saturation with water, to obtain the condition "saturated with dry surface".
    Mode of use
    In the presence of salt efflorescence brush thoroughly and spray the saline inhibitor Sanareg. If necessary, to increase plaster adhesion, apply a breathable anchoring scratch coat made with the specific lime-based preparation Untersana. Prepare the plaster by adding Caleosana to the mixing water, continue to mix until the desired mixture and the complete elimination of lumps is obtained. Apply with float and trowel or plastering pump. It is recommended to apply a minimum thickness of cm 2.5. Regularisation of the plastered surfaces with Sanastof lime-based ecological building fine mortar.
    Untersana rendering, applied by "spraying", must provide a rough, corrugated surface, designed to promote the bonding of the subsequent plaster, which must be applied no later than 2-3 days. For thicknesses greater than 2.5 cm, to improve the anti-cracking capacity, ensure the Armaglass 160 mesh is inserted.
    Protect fresh surfaces from direct exposure to the sun, the rain and the wind, cure the prolonged moist hardening.

    Application methods
    Finishing trowel
    Brick trowel
    Plastering machine
    Straight edge
    Tool cleaning
    Water
    Key features
    Maximum diameter of aggregate
    Maximum diameter of aggregate: 2 mm
    Mix with water
    Mix with water: 22 - 23 %
    Pot-life
    Pot-life: 90 min
    Shelf-life
    Shelf-life: 12 months
    Technical specifications

    Compressive strength
    UNI EN 1015-11

    > 5 N/mm²

    Flexural strength
    UNI EN 1015-11

    > 2 N/mm²

    Static elastic modulus
    EN 13412

    < 5000 N/mm²

    Permeability to water vapor
    UNI EN 1015-19

    < 10 μ

    Thermal conductivity
    EN 1745

    0.2 W/mK

    Capillary absorption
    UNI EN 13057

    0.83 kg•h^0.5/m²

    Density
    UNI EN 1015-6

    1075 kg/m³

    Bonding force
    UNI EN 1015-12

    0.40 N/mm²

    Reaction to fire
    EN 13501-1

    A1
    Consumption
    Approximately 9 kg/m² of Caleosana for every centimetre of thickness to be implemented (approximately 900 kg per cubic metre).
    Available colors
    Light gray
    Packaging and dimensions
    Bag 25 kg
    Storage and conservation
    Store the product in its original packing, in a fresh and dry environment, avoiding frost and direct sunlight.
    Additional content

    Warnings
    The general information, along with any instructions and recommendations for use of this product, including in this data sheet and eventually provided verbally or in writing, correspond to the present state of our scientific and practical knowledge.
    Any technical and performance data reported is the result of laboratory tests conducted in a controlled environment and thus may be subject to modification in relation to the actual conditions of implementation.

    Azichem Srl does not assume any liability arising from inadequate characteristics related to improper use of the product or connected to defects arising from factors or elements unrelated to the quality of the product, including improper storage.
    Those wishing to utilise the product are required to determine prior to use whether or not the same is suitable for the intended use, assuming all consequent responsibility.

    The technical and characteristic details contained in this data sheet shall be updated periodically. For consultation in real time, please visit the website: www.azichem.com. The date of revision is indicated in the space to the side. The current edition cancels out and replaces any previous version.

    Please note that the user is required to read the latest Safety Data Sheet for this product, containing chemical-physical and toxicological data, risk phrases and other information regarding the safe transport, use and disposal of the product and its packaging. For consultation, please visit: www.azichem.com.
    It is forbidden to dispose of the product and/or packaging in the environment.
    Photo gallery
    Technical Documentation

    Richiedi info sul prodotto

      By submitting I agree to the privacy notice

      Copyright © 2024 All Rights Reserved
      Powered by Webplease
      magnifiercross