BOND PLUS

Adhesive, flexible, reactive latex for mortars and plasters

Code: ADX.0008

Components: 1

Appearance: Liquid

Adhesive latex based on elastomeric styrene-butadiene rubber and alkaline silicate in aqueous dispersion, flexibilising, reactive, for adhesive grout and to improve adhesion, the behaviour and performance of mortars and plasters.

Customs Code

3824 4000

Linee di appartenenza

General characteristics

Temperature of use: +5 / +35 °C

Solvent-free

Pot-life: 40 - 60 min

Nonflammable

Density: 1.03 kg/dm³

Shelf-life: 12 months

Technical specifications

7.5 _

Available colours

- White

Packaging and dimensions

- Pallet tank (IBCs) 1000 kg

- Plastic can 10 kg

- Plastic can 25 kg

- Plastic can 5 kg

Consumption

Refer to the table shown in the product datasheet.

Use fields

Production of adhesive, deformable, high-protective and waterproofing performance mortars and plasters for civil, hydraulic, industrial works, in urban, marine and mountain atmospheres. Preparation of hydrating solutions to improve the adhesion and performance of premixed mortars and plasters; preparation of adhesive grouts for non-structural construction joints. Anti-dust treatments, reinforcing concrete surfaces.

Use method

Shake BOND PLUS thoroughly in the tank, and dilute it with water as required. Add the prepared solution to the cement (or lime) and aggregates mixture, in the most suitable dosages for this application, as specified below.
It is always essential to carry out preliminary tests for an accurate definition of the mixtures to use, and to check the suitability of the product on the basis of the specific requirements.