Syntech Poliurea Top Coating zoom
Syntech Poliurea Top Coating image 1
Syntech Poliurea Top Coating image 2
Syntech Poliurea Top Coating image 3

Syntech Poliurea Top Coating

Aliphatic polyurethane resin-based protective coating

A protective, pigmented, two-component formulation based on aliphatic polyurethane resins, ideal as a protective and aesthetic coating on waterproofing with SYNTECH POLIUREA SPRAY. Characterised by high levels of elasticity and elevated protection, even in aggressive atmospheres. Available on request in shades from the RAL colour range.
Components
Two-components
Appearance
Liquid
Customs code
3909 5090

Request product info

    By submitting I agree to the privacy notice

    Lines of belonging
    Linea prodotto Aqua
    Linea prodotto Floor
    Linea prodotto Infratech
    Thematic site
    Syntech Poliurea
    Where it is used
    How to use
    Technical data
    Additional content
    Warnings and precautions
    Media
    Related products
    Fields of application
    Surface coating pigmented for colouring polyurethane claddings, and their protection from UV rays (which in the absence of the top coating would alter the colour over time). After suitable priming with SYNTECH POLYUREA PRIMER, it can also be applied as a simple coloured aliphatic protective coating.
    Allowed supports
    Concrete
    Tiles
    Floor screed
    Polyurea and polyurethane
    Preparation of supports
    Polyurea support Vacuum and blow the surfaces to eliminate any dust that may have accumulated in the 24-48 hours following the installation of SYNTECH POLIUREA SPRAY Support in concrete, mortar, brick, tiles The support on which the polyurea system must be laid must be suitable for withstanding the stresses resulting from the intended use, such as static or dynamic loads, impacts, thermo-hygrometric dilations, vibrations, etc. As regards the characteristics of the substrate (maximum humidity, cohesion, strength class, flatness, etc.) and the preparation of the surface that will accommodate the resin system, we recommend the requirements set out in chapter 5 of the UNI 10966 standard ("RESIN SYSTEMS FOR SURFACES HORIZONTAL AND VERTICAL - INSTRUCTIONS FOR DESIGN AND APPLICATION "). In any case, carefully clean and degrease the surfaces, removing any kind of dirt, paint residues or incoherent parts. The humidity of the support must be <= 3%. Evaluate the most convenient type of mechanical preparation (shot peening, sandblasting, hydro-washing, etc.). The surfaces must also be free from discontinuity, and possibly leveled and regularized with products from the FLOOR line or the REPAR line. In case of presence (even suspected) of humidity deriving from capillary rising from the substrate, it is recommended to apply in advance the epoxy resin for "wet substrates" Syntech Pavidamp. Tiled floors, or floors covered with pre-existing resin, must be subjected to mechanical roughening carried out with shot blasting, milling, bush hammering, etc., until the total elimination of the waterproof crust and the opacification of the surfaces. Remove dust after abrasion. It is recommended to use Primer from the SYNTECH POLIUREA PRIMER range. On particularly absorbent substrates, to avoid the formation of craters / blowholes on the surface of the freshly sprayed product, it is recommended to use primers from the SYNTECH POLIUREA PRIMER range, always contacting the Azichem technical staff for clarification on the most suitable type to use. Apply several layers of primer until the porosity is saturated and providing a light dusting with clean and dry quartz sand (0.4-0.7 mm). Never dust off the primer. Provide suitable elastic sealing systems to cover joints, fittings, cracks or fissures subject to significant movements.
    Mode of use
    Pour component B with component A into a single container, taking care to remove all the material from the packaging. Mix thoroughly with a mixer at low revs, until a lump-free mixture is obtained.

    Apply with a roller or brush on the surfaces of SYNTECH POLYUREA SPRAY, within 24-48 hours of spreading the latter.

    A thorough sanding of the supports is recommended for any repairs and/or finishes.

    Application methods
    Brush
    Paint roller
    Tool cleaning
    Thinner for resins
    Key features
    Density
    Density: 1.18 (±0.05) kg/dm³
    Flammable material
    Flammable material
    Max. recommended thickness
    Max. recommended thickness: 200 μm
    Min. recommended thickness
    Min. recommended thickness: 125 μm
    Mixing ratio
    Mixing ratio: 100:21 _
    Shelf-life
    Shelf-life: 12 months
    Solvent-based product
    Solvent-based product
    Temperature of use
    Temperature of use: +7 / +35 °C
    Use wearing protective glasses
    Use wearing protective glasses
    Use wearing protective gloves
    Use wearing protective gloves
    UV-resistant
    UV-resistant
    Technical specifications

    Touch hardening at 20°C
    a 20°C

    20 - 26 h

    Dry residue
    10' a 105°C

    68 %

    Viscosity
    a 25°C

    230 mPa

    Complete hardening at 20°C
    a 20°C

    7 day

    Flash-point

    53 °C
    Consumption
    From 0.15 to 0.25 kg of SYNTYECH POLIUREA TOP COATING for each square metre of surface to be covered.
    Available colors
    Cartella colori RAL classic
    Packaging and dimensions
    Can 6.7 kg [A]
    Can 3.3 kg [B]
    Kit: 1 Can 6.7 kg [A] + 1 Can 3.3 kg [B]
    Storage and conservation
    Protect from freezing.
    Additional content

    Warnings
    SYNTECH POLYUREA TOP COATING is a flammable product, solvent-based, intended exclusively for professional use in external environment, to be handled wearing appropriate protective gloves, goggles and clothing, and filtering facial guards for organic vapours with protection class FFA2. Avoid contact with the product.

    Direct exposure to sunlight can cause fast and abnormal drying which may compromise the adhesion of product.

    Do not apply in case of direct exposure to sunlight and/or excessive ventilation. Avoid applying in thermal conditions at risk for the formation of condensation (the temperature of the support must be at least 3°C higher than the dew point).The general information, along with any instructions and recommendations for use of this product, including in this data sheet and eventually provided verbally or in writing, correspond to the present state of our scientific and practical knowledge.
    Any technical and performance data reported is the result of laboratory tests conducted in a controlled environment and thus may be subject to modification in relation to the actual conditions of implementation.

    Azichem Srl does not assume any liability arising from inadequate characteristics related to improper use of the product or connected to defects arising from factors or elements unrelated to the quality of the product, including improper storage.
    Those wishing to utilise the product are required to determine prior to use whether or not the same is suitable for the intended use, assuming all consequent responsibility.

    The technical and characteristic details contained in this data sheet shall be updated periodically. For consultation in real time, please visit the website: www.azichem.com. The date of revision is indicated in the space to the side. The current edition cancels out and replaces any previous version.

    Please note that the user is required to read the latest Safety Data Sheet for this product, containing chemical-physical and toxicological data, risk phrases and other information regarding the safe transport, use and disposal of the product and its packaging. For consultation, please visit: www.azichem.com.
    It is forbidden to dispose of the product and/or packaging in the environment.
    Photo gallery
    Video

    Richiedi info sul prodotto

      By submitting I agree to the privacy notice

      Copyright © 2024 All Rights Reserved
      Powered by Webplease
      magnifiercross