Syntech Poliurea Spray - FC zoom
Syntech Poliurea Spray - FC image 1
Syntech Poliurea Spray - FC image 2
Syntech Poliurea Spray - FC image 3

Syntech Poliurea Spray - FC

Polyurea elastomeric system for contact with food and drinking water

Syntech Poliurea Spray - FC is a pure aromatic polyurea specifically designed for contact with food substances and drinking water. 100% solid does not contain VOC and can only be applied by spraying using suitable bimixer machines. It is aromatic and is characterized by a high degree of elongation. It is a coating elastomer obtained from the reaction of an aromatic type isocyanate with an amine. PURE POLYUREA SUITABLE FOR FOOD CONTACT
Components
Two-components
Appearance
Liquid
Customs code
3909 5090

Request product info

    By submitting I agree to the privacy notice

    Obtained Certifications and Regulations
    D.M. 06/04/2004, n. 174FOOD CONTACT COMPLIANCECHEMICAL RESISTANT
    Lines of belonging
    Linea prodotto Aqua
    Linea prodotto Building
    Linea prodotto Infratech
    Thematic site
    Syntech Poliurea
    Features and benefits
    Where it is used
    How to use
    Technical data
    Additional content
    Warnings and precautions
    Media
    Related products

    Syntech Poliurea Spray - FC

    Resistance to laceration: 100 +/- 5 KN/m
    Tensile strength: 20 +/- 2 Mpa
    Advantages of the system:
    - Safe application even on irregular substrates, vertical or with large slopes.
    - Possibility to create continuous layers, free of critical protuberances created by common joints.
    - Possibility to create high performance, very thin layers, with low specific weight.
    - Possibility to perform maintenance and/or repairs easy and efficiently.

    Fields of application
    Syntech Poliurea Spray - FC is particularly used as waterproofing on concrete or as a protective coating for water containment tanks, primary containment, driveways and parking lots, purification plants, EPS coating, coating and protection of sheet metal, roofs, balconies and canopies in wood, tanks and pools, seamlessly without interruptions.
    Allowed supports
    Plasters
    Concrete
    Cement-based or lime-based mortars
    Prefabricated concrete
    Drywall
    Plaster (gypsum)
    Wood
    Metal surfaces
    Fiber-cement
    Tiles
    Floor screed
    Rock walls
    EPS
    Polystyrene
    Preparation of supports
    The support on which the polyurea system must be laid must be suitable for withstanding the stresses resulting from the intended use, such as static or dynamic loads, impacts, thermo-hygrometric dilations, vibrations, etc. As regards the characteristics of the substrate (maximum humidity, cohesion, strength class, flatness, etc.) and the preparation of the surface that will accommodate the resin system, we recommend the requirements set out in chapter 5 of the UNI 10966 standard ("RESIN SYSTEMS FOR SURFACES HORIZONTAL AND VERTICAL - INSTRUCTIONS FOR DESIGN AND APPLICATION "). In any case, carefully clean and degrease the surfaces, removing any kind of dirt, paint residues or incoherent parts. The humidity of the support must be <= 3%. Evaluate the most convenient type of mechanical preparation (shot peening, sandblasting, hydro-washing, etc.). The surfaces must also be free from discontinuity, and possibly leveled and regularized with products from the FLOOR line or the REPAR line. In case of presence (even suspected) of humidity deriving from capillary rising from the substrate, it is recommended to apply in advance the epoxy resin for "wet substrates" Syntech Pavidamp. Tiled floors, or floors covered with pre-existing resin, must be subjected to mechanical roughening carried out with shot blasting, milling, bush hammering, etc., until the total elimination of the waterproof crust and the opacification of the surfaces. Remove dust after abrasion. It is recommended to use Primer from the SYNTECH POLIUREA PRIMER range. On particularly absorbent substrates, to avoid the formation of craters / blowholes on the surface of the freshly sprayed product, it is recommended to use primers from the SYNTECH POLIUREA PRIMER range, always contacting the Azichem technical staff for clarification on the most suitable type to use. Apply several layers of primer until the porosity is saturated and providing a light dusting with clean and dry quartz sand (0.4-0.7 mm). Never dust off the primer. Provide suitable elastic sealing systems to cover joints, fittings, cracks or fissures subject to significant movements.
    Mode of use
    Pure polyurea Syntech Poliurea Spray - FC requires a bimixer system capable of producing pressure above 180 bar and temperatures above 65°C. Contact Azichem technical staff for clarification on the best gun to use and details of the system air.
    Application methods
    Two-components hot sprayer
    Tool cleaning
    Thinner for resins
    Key features
    Density
    Density: 1.11-1.12 (A) - 1.00-1.05 (B) g/cm³
    Dosage
    Dosage: 2.0 - 2.2 kg/m²
    Mixing ratio
    Mixing ratio: 1:1 (in volume) _
    Shelf-life
    Shelf-life: 6 months
    Suitable for contact with drinking water
    Suitable for contact with drinking water
    Temperature of use
    Temperature of use: -10 / +80 °C
    Use wearing protective glasses
    Use wearing protective glasses
    Use wearing protective gloves
    Use wearing protective gloves
    Technical specifications

    Hardness
    UNI EN ISO 868:2005

    48 +/- 3

    Viscosity

    650 +/- 200 (A) - 400 +/- 200 (B) mPas

    Permeability to water vapor

    0.025

    Gel time

    5 s

    Concrete adhesion (cutting test)
    UNI EN 1542:1999

    > 1.5 MPa

    Working temperature

    -30 / +130 °C

    Longitudinal elongation at break
    ISO 527-1:2012

    370 (+/- 30) %

    Touch hardening at 20°C

    > 30 s
    Consumption
    From 2,00 to 2,50 kg of SYNTYECH POLIUREA SPRAY - FC for each square metre of surface to be covered.
    Available colors
    Straw yellow
    Packaging and dimensions
    Barrel 225 kg [A]
    Barrel 205 kg [B]
    Kit: 1 Barrel 225 kg [A] + 1 Barrel 205 kg [B]
    Storage and conservation
    Protect from freezing.
    Additional content

    Warnings
    See the safety data sheet to view the complete data. Protect materials from humidity and water.The general information, along with any instructions and recommendations for use of this product, including in this data sheet and eventually provided verbally or in writing, correspond to the present state of our scientific and practical knowledge.
    Any technical and performance data reported is the result of laboratory tests conducted in a controlled environment and thus may be subject to modification in relation to the actual conditions of implementation.

    Azichem Srl does not assume any liability arising from inadequate characteristics related to improper use of the product or connected to defects arising from factors or elements unrelated to the quality of the product, including improper storage.
    Those wishing to utilise the product are required to determine prior to use whether or not the same is suitable for the intended use, assuming all consequent responsibility.

    The technical and characteristic details contained in this data sheet shall be updated periodically. For consultation in real time, please visit the website: www.azichem.com. The date of revision is indicated in the space to the side. The current edition cancels out and replaces any previous version.

    Please note that the user is required to read the latest Safety Data Sheet for this product, containing chemical-physical and toxicological data, risk phrases and other information regarding the safe transport, use and disposal of the product and its packaging. For consultation, please visit: www.azichem.com.
    It is forbidden to dispose of the product and/or packaging in the environment.
    Photo gallery
    Video

    Richiedi info sul prodotto

      By submitting I agree to the privacy notice

      Copyright © 2024 All Rights Reserved
      Powered by Webplease
      magnifiercross