Consilex Idrofix zoom
Consilex Idrofix image 1
Consilex Idrofix image 2
Consilex Idrofix image 3

Consilex Idrofix

Water-based consolidating product for stone, brick and concrete

Liquid product based on lithium silicates, which was created for the protective, consolidating and porosity reducer treatment of concrete, mineral, brick and stone substrates. It guarantees optimal durability and adhesion strength, resistance to UV rays, chemical agents and mechanical stresses. The result of the application allows to obtain a rapid hardening of the surface as well as a revived and homogeneous appearance of the same. The product has a negligible environmental impact thanks to the low VOC content (<50 g / l) and is practically odorless.
Components
Single-component
Appearance
Liquid
Customs code
3824 9970

Request product info

    By submitting I agree to the privacy notice

    Lines of belonging
    Linea prodotto Building
    Linea prodotto Opus
    Linea prodotto Sanageb
    Sito tematico
    ProSeal
    Where it is used
    How to use
    Technical data
    Additional content
    Warnings and precautions
    Media
    Related products
    Fields of application
    Protective, reinforcing, water repellent treatments of concrete, mineral and stone supports. Specific product for revitalizing, simultaneously providing a great consolidation and an annulment of the dust produced in concrete supports, interstices, brick, stone or mixed arches, present in taverns, public premises and of historic monuments interest.
    Allowed supports
    Plasters
    Cement-based or lime-based mortars
    Tuff
    Mixed walls (bricks and stones)
    Stone walls
    Porphyry and natural stones
    Bricks
    Preparation of supports
    The application surfaces should be clean, free of incrustations, dust etc. A preliminary wash with distilled water or steam it's recommended.
    Mode of use
    The support should be dry when applying. Apply the product as it is, with low pressure sprayer or brush with long bristles. Keep the substrate wet with Consilex Idrofix for at least 20 minutes during application. If applied on floors, wait 24 hours before passing on the treated support. The reinforcing contribution will be completed after 2-3 weeks of treatment.
    Application methods
    Low pressure airless nebulizer
    Brush
    Tool cleaning
    Water
    Key features
    Density
    Density: 1.19-1.21 kg/l
    Nonflammable
    Nonflammable
    Solvent-free
    Solvent-free
    Temperature of use
    Temperature of use: +5 / +40 °C
    Technical specifications
    The product doesn't create film

    VOC content

    < 50 g/l

    Walkable after

    24 h

    Minimum penetration time

    30 min

    Chloride content
    EN 1015-17

    < 0.05 %

    Depth of penetration

    2-8 mm

    pH

    11-12

    Active substance

    25-26 %
    Consumption
    From 0,20 to 1,00 kg of Consilex Idrofix per square meter of surface to be treated, based on the porosity of the support.
    Available colors
    Transparent
    Packaging and dimensions
    Plastic can 5 kg
    Plastic can 10 kg
    Storage and conservation
    Protect from freezing.
    Additional content

    Warnings
    The general information, along with any instructions and recommendations for use of this product, including in this data sheet and eventually provided verbally or in writing, correspond to the present state of our scientific and practical knowledge.
    Any technical and performance data reported is the result of laboratory tests conducted in a controlled environment and thus may be subject to modification in relation to the actual conditions of implementation.

    Azichem Srl does not assume any liability arising from inadequate characteristics related to improper use of the product or connected to defects arising from factors or elements unrelated to the quality of the product, including improper storage.
    Those wishing to utilise the product are required to determine prior to use whether or not the same is suitable for the intended use, assuming all consequent responsibility.

    The technical and characteristic details contained in this data sheet shall be updated periodically. For consultation in real time, please visit the website: www.azichem.com. The date of revision is indicated in the space to the side. The current edition cancels out and replaces any previous version.

    Please note that the user is required to read the latest Safety Data Sheet for this product, containing chemical-physical and toxicological data, risk phrases and other information regarding the safe transport, use and disposal of the product and its packaging. For consultation, please visit: www.azichem.com.
    It is forbidden to dispose of the product and/or packaging in the environment.
    Photo gallery
    Technical Documentation

    Richiedi info sul prodotto

      By submitting I agree to the privacy notice

      Copyright © 2024 All Rights Reserved
      Powered by Webplease
      magnifiercross