SEALGUM 20.10

Hydro-expansing rubber waterstop

Code: PRS.0180

Components: 1

Appearance: Stripe

Sealing waterstop based on a special mixture of natural and synthetic rubbers and hydro-expansive hydrophilic agents: in contact with water, it increases its volume up to over 3 times the original size. CLAYSEAL 20.10 is a simple and easy to install sodium bentonite waterstop; does not require any special preparations of the media, pre-shaped seats etc.

General characteristics

density

Density: 1.26 kg/dm³

hydroexpansive-product

Hydroexpansive product: +500 %

shelf-life

Shelf-life: 12 months

Technical specifications

Resistance to water pressure

5 bar

Fire resistance

B 2 _

Hardness

36 _

Surface section

200 mm²

Breaking load longitudinal

6.7 N/mm²

Available colours

- Blue

Use fields

Rigid construction joints and connections with safe and permanent hydraulic seal.

Preparation of supports

Take care to make the seat for laying the waterstop as smooth and homogeneous as possible. Remove any crumbling, non-adhering, powdery parts, etc.

Use method

SEALGUM 20.10 must be laid on the bed surface and fixed by nailing (a steel nail plus washer approximately every 25 cm). The joints between the waterstop kerbs are sealed by simply flanking and not by overlapping the ends. The positioning must ensure a coverage of 10-12 cm in the concrete, in order to contain the expansive action generated hydration.

In the case of particularly uneven or rough surfaces, it will be possible to apply SEALGUM 20.10 with the aid of the hydro-expansive sealant in cartridge FLEXSEAL 300.

Application methods

- Hammer

Permitted supports

- Concrete

- Cement-based or lime-based mortars

Warnings, precautions and Ecology

Carry out preliminary expansion tests in case of aggressive groundwater or with a high salt content.

Share

Calculate consumption

Calculate an approximate measurement of necessary consumption for this product

m